Installation,
Operation & Maintenance ManualReturn to the Parts Menu
| csiweb
> laars
oem >
h series Laars OEM Replacement Parts |
| CSI CONSERVATION SYSTEMS INC 407.351.9121 CONTACT BACK HOME |
| Laars Mark II
H Series H HW HP Hot
Water Boiler 150 MBH to 250 MBH |
| Please call (407) 351-9121 or send
a message for applicability, availability and pricing. Before
contacting CSI, please write down your unit's complete model and
serial number to help us identify the correct OEM replacement part(s) you
require. An asterisk (*) indicates a part we normally keep on hand. Other
OEM parts available by special order.
Please read our Terms
of Sale notice carefully before placing an order.
Installation,
Operation & Maintenance Manual Return to the Parts Menu |
| | Combustion System | Electrical System | Hydronic System | Vent System | |
|
|
| Combustion System |
| 2400-046 | Igniter with Gaskets |
| 2400-040 | Flame Holder Assembly with Gaskets |
| 2400-002 | Blower Assembly with Gaskets |
| 2400-032 2400-033 2400-222 |
Combustion Chamber Coil Assembly
(before s/n X91-1318) Combustion Chamber Coil Assembly (HW-M2) (after s/n X91-1319) Combustion Chamber Coil Assembly [H(P)-M2] |
| 2400-014 | Gas Valve |
| 2400-038 2400-052 1-428 2400-026 2400-028 1-236 1-458 2400-003 |
Top Dome for Combustion Chamber Insulation for Combustion Chamber (top) Insulation Retainer Gas Balance Line Bleed Line (H/HP) Blower Intake Duct Assembly Air Duct Hose Plastic Impeller Fan |
| 1-252 | Orifice Union |
| 2400-320 | Gasket Kit (includes Blower Gasket, Flame Holder Gasket and Igniter Gasket) |
| 2400-001 2400-042 |
Blower Gasket Igniter Gasket |
| Return to Top of Page |
|
|
| Electrical System |
| 2400-012 2400-224 |
Control Board (before s/n X91-1319) Control Board (after s/n X91-1318) |
| 2400-022 2400-024 |
High-Limit Safety Switch (215°F) High-Limit Safety Switch (240°F) (For high altitude applications.) |
| 2400-016 2400-226 |
Low-Limit Safety Switch (pre-M2) Low-Limit Safety Switch (strap-on for all HW-M2 units) |
| 2400-018 2400-056 2400-057 |
Operating Control (strap-on) (after
s/n X84-001 or X91-1318) Operating Control (210°F) (HW-M2) (after s/n X91-1318) Operating Control (185°F) (H-M2 or HP-M2) |
| 2400-010 | Relay (HW-M2 Series Only) |
| 2400-110 2400-106 2400-228 2400-020 2400-008 2400-010 1-506 2400-062 2400-006 |
Stack Switch Pressure Differential Switch Pressure Switch (M2) (after s/n X91-1318) Thermal Cut Out (after s/n X84-001 or X91-1318) R-1 Relay (before s/n X91-1319) R-2/R-3 Relay (Functions as the R-1 relay after s/n X91-1318.) Power Switch (120V) Time Delay Relay (H/HP) Transformer |
| 1-314 5-060 |
Wiring Harness (HW-M2) Wiring Harness (H-M2) |
| Return to Top of Page |
|
|
| Hydronic System |
| 2400-004 2400-005 |
Water Pump with Gaskets (Grundfos) Water Pump with Gaskets |
| 2400-036 2400-234 |
DHW Coil with Gaskets (Single
Wall) DHW Coil with Gaskets (Double Wall) |
| 2400-114 2400-112 |
Water Pressure/Temperature Gauge Water Pressure Relief Valve |
| 2400-030 | Thermostat (H-M2 Only) |
| 1-126 1-036 |
Water Pump Gaskets DHW Coil Gaskets |
| 2400-034 2400-238 2400-240 2400-242 |
Single-Wall Transfer Tank (Less Coil) Stainless Steel Transfer Tank (Less Coil) Single-Wall Transfer Tank & Coil Assembly Stainless Steel Transfer Tank & Coil Assembly |
| 2400-029 2400-030 |
Thermostat and O-Ring Thermostatic Union Assembly (H & HP Only) |
| 1-164 1-278 |
Boiler Discharge Fitting Boiler Discharge Tube |
| Return to Top of Page |
|
|
| Vent System |
| 2400-328 | Fixed Height Kit (provides all of the required venting materials for appliance installations which may have a fixed height of 11 inches and an adjustable horizontal run of 2' to 4') |
| 2400-326 | Adjustable Height Kit (for installations that require adjustable height and vertical run, kit provides vertical and horizontal lengths of pipe from 2' to 3½') |
| 2400-332 2400-334 2400-336 |
Vent Intake Pipe 5" (1') Vent Intake Pipe 5" (2') Adjustable Vent Intake Pipe 5" (2' to 3½') |
| 2400-346 2400-348 2400-354 |
1st 90° Elbow 3"
(female/female) 2nd 90° Elbow 3" (male/male) 45° Elbow 3" |
| 2400-338 2400-364 2400-340 2400-342 2400-344 |
Vent Exhaust Pipe 3" (1') Vent Exhaust Pipe 3" (2') Vent Exhaust Pipe 3" (3') Adjustable Vent Exhaust Pipe 3" (2' to 3½') Adjustable Vent Exhaust Pipe with Terminal 3" (2' to 3½') |
| 2400-347 2400-349 2400-356 |
1st 90° Elbow 5"
(male/male) 2nd 90° Elbow 5" (female/female) 45° Elbow 5" |
| 2400-330 | 2nd Elbow Set 3"/5"
(male/female) (includes 3" and 5" elbows) |
| 2400-277 2400-278 2400-370 |
Vent Terminal Cap (5"
straight thru) Vent Terminal Extension Rain Hat for Vertical Venting 3" |
| 2400-350 2400-352 |
Flue Adapter 3" (includes
2400-342 Adjustable Vent Exhaust Pipe) Flue Adapter 3" (8½" long) |
| 2400-358 2400-362 2400-372 2400-304 2400-280 2400-281 2400-324 2400-282 |
Condensate Drain Fresh Air Tee Alternate Vent Clamp 3" Spring Support Steel Wall Flange 5" Rubber Wall Flange 5" Aluminum Tape (2" wide x 3' long) Silicone Sealant (1 oz tube) |
| 2400-326 2400-328 |
Carton of B Direct Vent
(Standard) Carton of B Direct Vent (Alternative) |
| Return to Top of Page |
|
|
|
Please call (407) 351-9121 or send
a message for applicability, availability and pricing. Before
contacting CSI, please write down your unit's complete model and
serial number to help us identify the correct OEM replacement part(s) you
require. An asterisk (*) indicates a part we normally keep on hand. Other
OEM parts available by special order.
Please read our Terms
of Sale notice carefully before placing an order.
Installation, Operation
& Maintenance Manual Return to the Parts Menu |
| Specifications subject to change without notice. |
| Site
Copyright 2006 © Conservation
Systems, Inc. Orlando, Florida USA All other trademarks, logos and copyrights are the property of their respective owners. |
| Return to Top of Page |