csiweb > domestic hot water > laars everhot commercial

 LAARS EverHot Tankless Water Heater
CSI CONSERVATION SYSTEMS INC 407.351.9121    CONTACT    HOME
   
Go Tankless: Endless On-Demand Hot Water Now!
The new LAARS EverHot on-demand instantaneous water heaters provide continuous hot water to multiple points-of-use at the same time (up to 8.5 gallons per minute) without inline circulation pumps, bulky storage tanks or long waits for hot water to reach a faucet, shower, dishwasher, etc.

Powerful
Single units can easily handle several hot water draws at once. Multiple units can be manifolded together for larger volume applications or placed strategically throughout a restaurant, recreational facility or commercial building.

Flexible
Indoor or outdoor installation (outdoor units are operated via a supplied remote control).
 
Intelligent
Self-modulating direct vented combustion system, self-monitoring temperature control system, and self-diagnostic malfunction detection and indication.
 
Space Saving
The EverHot's small overall size allows it to be installed in virtually any closet, utility room, a convenient corner or even in the cabinet under a sink.
 
Economical
The EverHot only runs when there's a call for hot water. After instantaneously meeting the demand, it completely shuts down, saving on both fuel and water bills, especially over the long run. 		LAARS EverHot Tankless Water Heater
Brochure
Submittal Data
Instruction Manual
    
EverHot Recovery Rates
Hot water flow rate and first hour ratings.
Model Temperature Rise 40°F 60°F 80°F 100°F 120°F 140°F
IGI-180C-10N
Indoor		 Flow Rate GPM 7.7 5.1 3.8 3.1 2.6 2.2
First Hour Rating GPH 462 306 228 186 156 132
IGE-199C-10N
Outdoor		 Flow Rate GPM 8.4 5.6 4.2 3.3 2.8 2.4
First Hour Rating GPH 504 336 252 198 168 144
Maximum flow rate in gallons per minute (GPM) at which hot water at the indicated temperature (°F) can be produced. First Hour Rating (FHR) is the amount of hot water that can be produced per hour in gallons (GPH). Not recommended for use as a hot water be booster. Temperature can be adjusted from 96°F to 180°F. 
Return to Top of Page
 
EverHot Performance Ratings
Fuel energy input and heat energy output; maximum hot water flow; and recovery efficiency.
Model IGI-180C-10N IGI-199E-10N
Minimum Input MBH 15 15
Maximum Input MBH 180 199
Minimum Output MBH 13 13
Maximum Output MBH 156 167
Maximum Hot Water Flow GPM 14.7 16.1
Recovery Efficiency % 87 84
Minimum and maximum fuel energy input and heat energy output in BTUs/hour x 1000 (MBH). Maximum hot water flow at a 77°F temperature rise. Recovery efficiency measures how efficiently a heat exchanger transfers heat from the combustion process to water (expressed as a percentage). Exterior LP model 85% efficient. NOx emissions less than 40 ppm. Electrical rating: 120VAC at 60 Hz. Electrical consumption: 75 watts during normal operation (100 watts in anti-frost protection mode).
Return to Top of Page
 
EverHot Physical Specifications
Approximate dimensions; connection sizes; and approximate shipping weight.
Model IGI-180C-10N IGE-199C-10N
Height in. 24 24
Width in. 14 14
Depth in. 9 9
Gas Connection in. ¾ ¾
Water Connection in. ¾ ¾
Vent Connection: in. 5 5
Approximate Shipping Weight lbs. 50 50
Return to Top of Page
 
Central Florida Representative:
Manufacturer:
Conservation Systems, Inc.
5850 Lakehurst Drive, Suite 120
Orlando, FL 32819-8386
407.351.9121 Phone
407.352.6391 Fax
www.csiworldwide.com		 Laars Heating Systems Co.
A subsidiary of Bradford White Corporation
1355 Kuehner Drive
Simi Valley, CA 93063-4478
1-800-900-9276
www.laars.com 
 
Specifications subject to change without notice.
Please read our Terms of Sale notice carefully before placing an order.
Site Copyright 2006 © Conservation Systems, Inc. Orlando, Florida USA
All other trademarks, logos and copyrights are the property of their respective owners.
Return to Top of Page